+ 8 Pouches per Case / 40 Lbs per Box
DIRECTIONS FOR USE: Splash pH Minus (Sodium Bisulfate)1. Test the pH of the pool water with a reliable test kit.2. If pH is below 7.2, add Splash pH Plus at a rate of 1lb. per 10,000 gallons of water.3. Dissolve by adding Splash pH Plus to a bucket of cold water. Mix thoroughly and pour into pool while walking around the perimeter. Splash pH Plus may also be added directly to the pool water.4. Retest pH every 4 hours and add additional Splash pH Plus until the pH is in the acceptable range of 7.2 to 7.8 (ideal pH is 7.4 to 7.6).NOTE: Do not add more than 4lbs. of Splash pH Plus per 10,000 gallons of water at a time. If the Total Alkalinity and pH are very low (below 7.2 pH or Total Alkalanity below 60ppm), have your water tested for copper and iron before proceeding. Do not add Splash pH Plus the same day as Splash Hardness Plus.
Buckmans Incorporated 105 Airport Road | Pottstown, Pa 19464 | Phone: 610.495.7495 | Fax: 610.495.7229 | Site Designed by Media Fusion Technologies, Inc.